Fabrication - Partial Listing of Completed Projects in the 
Power Generation Industry

AZCO's FABRICATION FACILITIES occupy 120,000 square feet of fabrication space outfitted with the very latest in specialty welding equipment for welding stainless, chrome, carbon steel, and various other alloys. With AZCO's ability to work from a diverse range of specification and materials we have the capabilities to provide pipe fabrication to owners, engineers and construction firms throughout the country.

ALSTOM POWER - Midlothian, Virginia

• Shop fabricated stainless steel piping for lube oil, control oil, generator seal oil, generator gas cooling and interconnecting piping systems for Texas Utilities 580MW Sandow Steam Electric Station Unit #5 - Rockdale, Texas

• Shop fabricated carbon steel, chrome-moly and stainless steel piping for lube oil, gland steam and condensate systems for Astoria Energy's 500MW Combined-Cycle Plant - Queens, New York

• Large bore stainless steel and carbon steel fuel oil, control oil, gas cooling and stator cooling pipe spools for steam turbine / generator at Reliant Energy Seward Repowering Project - East Wheatfield, Pennsylvania

ALSTOM POWER - Windsor, Connecticut

• Fabrication of ash water, raw water, service air and water cannon pipe spools, instrument air, closed cycle cooling water, deluge piping / fire protection, safety valve drain and fuel gas piping systems, 16 safety valve vent stacks and drip pan elbow assemblies for Xcel Energy Comanche 3 Generating Unit - Pueblo, Colorado

• Shop fabricated 3" - 16" diameter carbon steel balance of plant pipe spools for East Kentucky Power Spurlock Unit 1 wet flue gas desulfurization and wet electrostatic precipitator project - Maysville, Kentucky

BABCOCK & WILCOX - Barberton, Ohio

• Fabrication of P-91 chrome-moly PSH and SSH attemperator spraywater piping for Wisconsin Public Service Weston 4 Project - Rothschild, Wisconsin

BABCOCK POWER - Worcester, Massachusetts

• Carbon steel and hastelloy pipe spool fabrication for emergency quench system for Kentucky Utilities Ghent Generating Station Unit #4 - Ghent, Kentucky

• Fabrication of oxidation air, mist eliminator wash and service reclaim piping for Kentucky Utilities Ghent Generation Station Unit #4 - Ghent, Kentucky

BECHTEL POWER CORPORATION - Frederick, Maryland

• Shop fabricated Victaulic piping systems including fire water, fire protection and closed cooling water for WE Energies two 615MW coal-fired units at Elm Road Generation Station - Oak Creek, Wisconsin

BLACK & VEATCH - Overland Park, Kansas                                                                                                   Back to Top

• Large bore carbon steel pipe rack piping and low pressure fabricated piping for Milford Power - Milford, Connecticut

BLACK & VEATCH / BARTON MALOW (BVBM) - Overland Park, Kansas

• Large bore and small bore carbon steel, stainless steel and chrome-moly low pressure and balance of plant pipe spool requirements for Reliant Energy - Hunterstown, Pennsylvania

BLACK & VEATCH / GILBERT - Overland Park, Kansas

• Large bore carbon, chrome and stainless steel fabricated piping systems including compressed air, auxiliary cooling water, fuel gas, fuel oil, boiler feedwater, condensate, fire protection and wastewater collection and treatment for Tenaska / Frontier Generating Station - Shiro, Texas

BLACK & VEATCH / ZACHRY (BVZ Power Partners) - Overland Park, Kansas

• Large bore and small bore carbon steel, stainless steel and chrome-moly low pressure and balance of plant pipe spool requirements for Reliant Energy - Choctaw, Mississippi

• Low pressure carbon steel, stainless steel and chrome-moly pipe spool requirements for Rhode Island State Energy Project consisting of (2) 170MW combustion turbine generators, (2) HRSG's and (1) 200MW steam turbine generator - Johnston, Rhode Island

• Large bore carbon, chrome and stainless steel pipe fabrication for Tenaska / Gateway Generating Station - Henderson, Texas

BURNS & McDONNELL - Kansas City, Missouri

• Large bore carbon steel and stainless steel pipe fabrication for low pressure steam and condensate, fuel gas, turbine lube oil, feedwater, boiler blowdown and all remaining balance of plant requirements for Mirant (f/k/a Southern Energy Inc.) Phase II Combined Cycle Project - Zeeland, Michigan

CASEY INDUSTRIAL, INC. - Broomfield, Colorado

• Carbon steel and chrome-moly pipe spool fabrication for air preheat, auxiliary cooling water, auxiliary steam, boiler vents and drains, condenser air, igniter gas, service water, turbine lube oil and waste water discharge systems for Black Hills Corporation 90MW Coal-Fired Wygen II Unit 4 Power Plant - Gillette, Wyoming

DELTAK - Plymouth, Minnesota

• Stainless steel, carbon steel and chrome-moly interconnecting and trim piping for Ponderosa Pine Energy Partners - Cleburne, Texas

• Carbon steel ammonia injection piping for PPL Corporation. Twelve (12) LM6000 simple cycle turbines - University Park, Illinois

• Large bore carbon steel and chrome-moly pipe spool fabrication including all interconnecting systems, silencer and stack piping, drains and vent piping, steam trim piping and ammonia systems for Portland Electric Generating 650MW Port Westward Generating Plant - Clatskanie, Oregon

• Chrome-moly and carbon steel pipe spool fabrication for Air Products and Chemicals / PREMCOR REFINING - Port Arthur, Texas

• Carbon steel pipe spool fabrication and fabrication of one trim piping sample cooler module for Suncor Firebag Cogeneration Project - Alberta, Canada

FOSTER WHEELER CORPORATION - Clinton, New Jersey                                                                            Back to Top

• Feed water piping, desuperator spray piping, superheater supply piping and main steam outlet header for Anvil Corporation / Chevron - Kapolei, Hawaii

KIEWIT INDUSTRIAL COMPANY - Lenexa, Kansas

• 54" diameter circulating water piping for Sempra Energy Resource 550MW Combined-Cycle Palomar Energy Project - Escondido, California

• Chrome-moly main steam pipe fabrication for Morris Cogeneration Plant - Morris, Illinois

• Carbon and stainless steel pipe fabrication for Eldorado Energy - Boulder City, Nevada

• Shop fabricated pipe spool requirements including fuel gas, closed cooling water, fire protection water, service water, circulating water, low pressure steam and balance of plant piping for Mid-American Energy 540MW Greater Des Moines Energy Center - Pleasant Hill, Iowa

MITSUBISHI POWER SYSTEMS, INC. - Newport Beach, California

• Shop fabricated carbon steel ammonia headers and interconnecting piping spools for SCR Systems at Reliant Energy - Hunterstown, Pennsylvania and Choctaw County, Mississippi

• (4) 12' diameter aqueous ammonia tanks for SCR Project - Midlothian, Texas

• Shop fabrication of air inlet pressure instrument piping, lube oil vapor and drain piping and supports for 2 gas turbines for Xcel Energy High Bridge Combined Cycle Power Plant - St. Paul, Minnesota

NOOTER ERIKSEN - St. Louis, Missouri

• HRSG pipe spools, carbon steel and chrome-moly, for:
  
  Nova Chemicals - Joffre, Alberta, Canada
  
  Westinghouse - Philadelphia, Pennsylvania
  
  Sacramento Power Authority - Sacramento, California
  
  Calpine Corporation - Tiverton, Rhode Island and Rumford, Maine
  
  Millennium Power - Charleston, Massachusetts

WISCONSIN PUBLIC SERVICE CORPORATION - Green Bay, Wisconsin

• Building thirteen (13) fabricated skid assemblies for the 530MW Weston 4 Coal-Fired Power Plant - Rothschild, Wisconsin
  
  Heating condensate return pump skid, demineralized water transfer pump skid, demineralized water booster pump skid, condensate transfer pump skid, recycled slurry water supply skid, first stage air preheat water circulation / heat exchanger / glycol circulation skids, station heating heat exchange skid, station heating pump skid, cooling tower makeup pump skid, low head service water pump skid and service water pump skid.
  

Back to Top